SANTA CLARA, Calif., September 6 2006 – RAID storage expert Infortrend® today announced that it is adding multipathing technology to its family of EonStor® RAID storage subsystems. Called EonPath™, this multipathing software provides a dynamic fault-tolerant technique that helps avoid downtime or data loss that can result from a connection failure in a single-path configuration. EonPath makes it possible to have more than one connection between the host and storage devices so that in case of failure the host can access the storage device via another path thereby maintaining continuous operation and data availability.
EonPath multipathing technology is comprised of two major functions—fail-over protection and load balancing—to provide high availability and improved performance.
RAID functionality protects stored data but does not increase the reliability of data transmission between the storage devices and the host. If an HBA, cable, or bus fails, the connected devices cannot be accessed. EonPath supports fail-over redundancy between the host and the EonStor array by enabling the host operating system to transparently route I/Os over alternate data paths, so that disk access will not be interrupted by hardware failures.
Avoiding traffic bottlenecks is especially important in high workload settings or any situation requiring consistent service levels. Load balancing increases I/O performance by redistributing read/write requests in order to maximize throughput between the host and storage devices. With EonPath, the operating system is aware of multiple data paths so it can reroute traffic to or from the storage devices to paths with available bandwidth, thereby increasing throughput, avoiding bottlenecks, and distributing the load equally.
“With EonPath multipathing functionality on our EonStor systems, IT managers can ensure uninterrupted operation while maximizing the efficiency and availability of their computing and storage environments,” said Tony Chu, president of Infortrend Corporation. “EonPath's transparent fail-over mechanism and performance improvements significantly increase available bandwidth while its automatic adaptive load balancing maximizes throughput and prevents data path bottlenecks.”
This powerful multipathing solution will start shipping at the end of September 2006 on the current redundant controller ASIC266 models, including the EonStor S12F-R1420, ES A24F-R2224, and ES FF-R2021-6 systems, and will be included on all models of the next generation ASIC400 EonStor subsystems.
###
Infortrend, EonStor, and RAIDWatch are trademarks or registered trademarks of Infortrend Technology, Inc. Other trademarks are the property of their respective owners.
Media Contacts:Sturgeon Public Relations |
|
A3 Communications Federica Monsone +44 (0) 1252 875 203 fred.monsone@a3communications.co.uk |