|
|
EonStor S12S-R1032 Accessories and Spare Parts
Spare Parts
 |
IFT-9273S1DT2S1S |
Drive tray, with pre-installed MUX board, for using SATA-II 3Gb/s disk drives in a dual-controller |
 |
IFT-9279CPSU |
Power supply module for EonStor 2U series, ASIC400 S12S-X1032 series subsystems, 530W capacity |
 |
IFT-9279CFanMod |
Cooling fan module for EonStor, ASIC400, and 2U-profile S12S-X1032 series subsystems |
 |
IFT-9275CBT |
Li-Ion battery module |
 |
IFT-89S10RE12 |
SAS to SAS RAID controller module, 2 x SAS host ports + 1 SAS expansion port, RAID 6, for dual-controller S12S-R1032 |
|
IFT-89S10RE12M5 |
SAS to SAS RAID controller module, 2 x SAS host ports + 1 SAS expansion port, RAID 6, for dual-controller S12S-R1032, w/ 512MB memory |
 |
IFT-9011 |
Null Modem, DB9 female to DB9 male, wires swapped |
 |
IFT-9270ASCab |
RS-232C serial cable, audio-jack to DB9 |
 |
IFT-9270CmSASCab2 |
SAS external, Mini SAS 4x to Mini SAS 4x (SFF-8088) cable, 120cm |
 |
IFT-DDRESCEM5 |
512MB DDR RAM DIMM module |
Accessories
 |
IFT-9273CDTray |
Drive tray, Type-III bezel and Type-II LED lightpipe |
 |
IFT-9270AYCab |
Serial port Y-cable for dual-controller subsystems, 2 audio jacks -to- 1 DB-9 |
 |
IFT-9270CmSASCab4 |
SAS external cable, Mini-SAS 4x (SFF-8088) to Infiniband (SFF-8470 thumbscrew type4) x, 120cm. |
 |
IFT-9272CDTrayDmy |
Dummy Drive tray, Type-II bezel |
 |
IFT-9275CBTE |
Battery cell pack, Li-Ion, high capacity for EonStor ASIC400, 2U-profile series |
 |
IFT-9270CUPSCab |
UPS cable, audio-jack to DB9 |
 |
IFT-9270CUPSYCab |
Serial port Y-cable to UPS device for dual-controller subsystems, 2 audio jacks -to- 1 DB-9 |
 |
IFT-9279CSlider36 |
Enhanced rackmount bracket assembly for EonStor S12S-X1032 2U series subsystem, 23 to 36 inches rack depth |
 |
IFT-9273S1N2S1S |
HDD MUX board, 2-to-1 SATA MUX conversion, power MOS switch embedded, dual-controller subsystems |
 |
IFT-DDRESCEMA |
1GB DDR RAM DIMM module |
 |
IFT-DDRESCMB |
2GB DDR RAM DIMM module |
|
