IFT-6200, 6300, 7200
Tower, Rackmount RAID Subsystem, ODM/ SI board
| Model | No. of drive bays | Host channel |
|---|---|---|
| 6200-6F1 | 6 | FC-1G x 1 |
| 6200-6F1D | 6 | FC-1G x 2 |
| 6200-8F1 | 8 | FC-1G x 1 |
| 6200-8F1D | 8 | FC-1G x 2 |
| 6300-8F1 | 8 | FC-1G x 1 |
| 6300-8F1D | 8 | FC-1G x 2 |
| 7200-6F1 | 6 | FC-1G x 1 |
| 7200-6F1D | 6 | FC-1G x 2 |
| 7200-8F1 | 8 | FC-1G x 1 |
| 7200-8F1D | 8 | FC-1G x 2 |
- 64-bit RISC-based PowerPC CPU
- 32/64/128/256MB SODIMM SDRAM cache memory; up to 1 GB supported
- ODM/SI boards - board dimensions: 7.4L x5.59W x 0.98H inches
- Two independent 33MHz 32/64-bit PCI buses
- Firmware in Flash ROM for easy upgrades
RAID Operation
- RAID level 0, 1(0+1), 3, and 5
- Hot spare drive operation
- Drive hot-swap (replacement of defective drive in full operation)
- Automatic background rebuild
- RAID expansion online
Advanced RAID Protection
- Media Scan: data stripe-media soundness check and data block re-allocation
- Intelligent Drive Handling in array degrade mode
SAN Management
LUN Masking access control over terminal emulation, configurable filter entry variables
Management
- Firmware-embedded Java-based GUI RAID manager over in-band SCSI featuring global manageability; real-time event notification and monitoring
- Powerful NPC (Notification Processing Center) module for event notification over Email, fan, LAN broadcast, SNMP traps, etc.
- Firmware-embedded manager via RS-232 port
Drive Interface
- Drive format IDE ATA-66 and ATA-100 applicable
- 6 to 8 hot swap drive bays and trays
- Automatic bad sector reassignment
- Supports 1" high form factor
Host Interface
- 1Gbit Fibre
- Concurrent I/O commands
- Tagged Command queuing up to 256
- Automatic bad-sector reassignment
Controls/Indicators
- Front LCD control panel for setup and configuration
- 3 drive LED indicators: power, activity, and failure
- Fan, power, temperature, and drive failure indication through RAIDGuide manager
- Built-in alarm
Management Software
- Java-based RAIDWatch manager software for Windows 2000 and Windows NT via in-band SCSI; easy customer modification of GUI graphics
- Powerful NPC (Notification Processing Center) module for event notification over Email, fax, LAN broadcast, etc.
- Firmware-embedded manager via RS232C (platform independent)
Physical/Electrical
Interfaces:
Power supply:
- 2 redundant hot-swappable power supplies with PFC
- Input - 90-260VAC, 47-63Hz
- Output - 12V: 14A max.; 5V: 16A max.; 250watts in total.
- Operating temperature: 5 to 40°C
- Relative Humidity 10-95%, non-condensing
- Operating altitude: sea level to 10,000 ft
- MTBF >500,000 hrs
Dimensions
- System dimensions: Carton
- 6-bay tower: 13.8"H x 6.8"W x 12.9"D (short-tower configuration)
- 8-bay tower: 16.3"H x 6.8"W x 13.5"D Same as above
- rackmount: 3U x 18.9"W x 19.3"D (rackmount configuration - standard equipment cabinet
size)
Interfaces:
One to two 3-pin Fibre connectors with external DB-9 Fibre port(s) for Fibre subsystems, and one DB-9 RS-232C serial port (38400, n, 8, 1) for terminal connection (all configurations).