Turn on the System
- Connect the included power cords to the power sockets of the storage device (A).
- Turn on the networking devices.
- Turn on the JBOD expansion systems (if applicable).
- Press the power button to turn on the storage device (B).
Check System Status
Once you have turned on the storage system, wait for three minutes. Then check the system status with the following LEDs.
Front Panel LEDs
The service LED (1) should be off, while all the other LEDs should be lit in green.
| Front Panel LEDs | ||
 | ||
| Number | LED Name | Normal Status |
 | Service | OFF |
 | Power | Green |
 | Cooling fan | Green |
 | Temperature | Green |
 | System fault | Green |
 | Mute/Service button | -- |
Home