We use cookies on this website. To find out more about cookies and how they are used on this website, see our Privacy Policy.
By clicking ?ontinue?? you hereby agree with our use of cookies.

Knowledge Base

How to Connect to EonStor GS Series Storage via Serial Console (PuTTY)

Last modified date: Mon, 07 Sep 2026 17:19:25 GMT+8

Prerequisites

  • RS-232 serial cable

  • Terminal emulation software (e.g., PuTTY)

  • Serial port interface on your client PC (or a USB-to-Serial adapter)

Procedure

  1. Power on the storage system: Turn on the GS storage system and wait until the boot process is complete and the system is ready.

  2. Connect the serial cable: Connect the RS-232 serial cable from the primary controller’s console port to your PC.

     

  3. Launch the terminal emulator: Open PuTTY on your PC.

  4. Configure connection settings:

    • Go to the Session category.

    • Under Connection type, select Serial.

    • In the Serial line field, enter your PC's corresponding COM port (e.g., COM1).

    • In the Speed field, enter the default baud rate for your model:

Default Baud RateSupported Models
115200

• GS 3000/4000 Gen2/Gen3


• GSe 3000/4000 Gen2/Gen3


• GS 3025UR/4025UR/5024UR

 

• GS 5000

38400

• GS 2024UR/3024UR


• GS/GSe Gen1


• GSe Pro

  1. Establish connection: Click Open to launch the terminal session.

  2. Navigate the firmware console:

    • Press Ctrl + L to refresh the console screen.

    • Use Enter to proceed to the next screen and Esc to return to the previous screen.

    • When prompted, enter the default password: admin

Was this article helpful?Yes | No

Thank you for your feedback!

Do you have any other feedback for this article?

{{ vm.showErrorMessage }}