We use cookies on this website. To find out more about cookies and how they are used on this website, see our Privacy Policy.
By clicking ?ontinue?? you hereby agree with our use of cookies.

База знаний

How to create a RAID 10?

Last modified date: Thu, 24 Oct 2024 15:56:55 GMT+8

Introduction

This tutorial will guide you through the process of creating a RAID 10 array. RAID 10, also known as RAID 1+0, combines disk mirroring and striping to provide both high availability and performance. It requires a minimum of four drives.

Procedure

Step 1: Create a Logical Volume (LV) with RAID 1

  • Access the storage management interface.
  • Select the option to create a new Logical Volume (LV).
  • Choose RAID 1 as the RAID level.
  • Select the drives you want to include in this RAID 1 configuration.
  • Confirm the creation. You will now see one Logical Drive (LD) with the relevant drives under this LV.

Step 2: Add Another Logical Drive (LD) to the LV

  • Select the existing LV that you created in Step 1.
  • Click on "Add logical drive" at the bottom of the panel.

Step 3: Create Another LD with RAID 1

  • Follow the same process as in Step 1 to create a new LD with RAID 1.
  • Select another set of drives for this new RAID 1 configuration.
  • Confirm the creation.

Step 4: Verify the RAID 10 Configuration

  • You should now see two LDs with RAID 1 under the same LV.
  • This configuration indicates that you have successfully created a RAID 10 array, as it combines the two RAID 1 groups by striping them.
Summary

By following these steps, you have created a RAID 10 configuration, which provides a balance of redundancy and performance. This setup ensures that your data is mirrored for redundancy and striped across multiple drives for enhanced read/write performance.

If you encounter any issues or need further assistance, please refer to our support documentation or contact our technical support team.

Was this article helpful?Да | No

Thank you for your feedback!

Do you have any other feedback for this article?

{{ vm.showErrorMessage }}