We use cookies on this website. To find out more about cookies and how they are used on this website, see our Privacy Policy.
By clicking ?ontinue?? you hereby agree with our use of cookies.

Knowledge Base

How to replace or remove the super capacitor in GS series?

Last modified date: Fri, 22 Nov 2024 14:23:53 GMT+8

Symptom:

Need to remove the super capacitor before replacing the memory module, or you received a "Super Capacitor failed" error message indicating that the super capacitor needs to be replaced.

Diagnosis:
The super capacitor may be damaged due to a power trip or because its life limit has been reached.

Solution:
  • Remove the controller from the enclosure.
  • Remove the super capacitor:
    1. Loosen the screw securing the super capacitor to the controller (A).
    2. Lift the super capacitor to a 45° angle (B).
    3. Pull to remove it from the controller (C).
      Pull to remove it from the controller
  • Install the replacement super capacitor:
    1. Attach the replacement super capacitor to the controller.
    2. Tighten the screw to secure it in place.
  • Reinsert the controller into the enclosure.

Was this article helpful?Yes | No

Thank you for your feedback!

Do you have any other feedback for this article?

{{ vm.showErrorMessage }}