ESVA F70-2830 | Infortrend

ESVA F70-2830 (Legacy product)

ESVA F70-2830 ist ein Hybrid-Modell mit Fibre-Channel- und iSCSI-Host-Interface. ESVA wurde für eine leistungsfähige, zuverlässige und flexible Fibre-Channel SAN-Unterstützung entwickelt. Mit seinem SAS-Laufwerks-Interface verfügt ESVA F70-2830 über die Leistung auch anspruchsvolle Transaktionen zu verarbeiten. Durch die Konsolidierung von bis zu zwölf ESVA-Systemen in einen Speicher-Pool kann die maximale Kapazität auf bis zu 1344 Laufwerke erweitert werden. Darüber hinaus ermöglichen die iSCSI-Ports eine kostengünstige Remote-Replikation.

This model is discontinued; the recommended offering is EonStor DS SAN storage.

Neueste Generation
Einkaufsreferenz

Eigenschaften	Benefits
Storage virtualization	Eliminate physical boundaries of storage consolidation
Thin provisioning	Ensure the most efficient allocation of pooled capacity
Automated storage tiering	Easily meet different service level requirements with up to four tiers distinguished by drive types and RAID levels Achieve optimized data distribution in storage pool with automated data migration
Distributed load balancing	Make performance grow linearly by adding subsystems to the virtualized foundation
Prioritized volume accessibility	Ensure applications to achieve their ideal service levels
Data protection: Snapshot Volume copy/Volume mirror Sync and async remote replication	Support the highest data availability and quick service restart after storage accidents
Eight 8Gb/s Fibre Channel host ports	Best-of-class throughput and IOPS, ideal fit for IO-intensive and bandwidth-demanding applications Backward compatible with 4Gb/s or 2Gb/s speeds, protecting current infrastructure investment
Four 1Gb/s iSCSI ports	Achieve highly cost-effective remote replication through iSCSI ports Achieve consolidated SAN tiering to meet service level requirements of tier 1 applications on FC SAN and tier 2 applications on IP SAN
Green design: High-efficiency power supplies Intelligent multi-level drive spin-down technology	80 PLUS-certified power supplies delivering more than 80% energy efficiency In spin-down state, drives can save up to 60% of energy consumption
CacheSafe technology	Backup battery automatically supplies power to write cached data into flash module for permanent protection during power outage
Fault-tolerant hardware modules	Redundant controllers, PSUs, fans; high-availability hardware design, preventing "single-point-of-failure"
Expansion up to 1,344 HDDs	"Pay-as-you-grow" scalability; no waste on what you don’t need, and no worries in terms of forecasting what you will need in the future
Powerful management suite (SANWatch) support, including multi-pathing functions	Easy management and monitoring of your subsystems anywhere, locally or remotely Recognize and manage redundant paths; support path failover and load-balancing
Multiple monitoring methods	Real-time problem detection and notification to achieve continuous operation

Hostanschlüsse

8 x 8Gb/s Fibre-Channel-Anschlüsse (4 pro Controller)
4 x 1Gb/s iSCSI Anschlüsse (2 pro Controller)

Controller

Doppelt redundante Controller

Cache-Speicher

8GB oder 16GB

Antriebsanbindung

6Gb/s SAS connectivity
S.M.A.R.T. support
Automatic bad-sector reassignment
Dedicated bandwidth to each connected drive

Hilfslaufwerke

2.5" SAS 6G MLC SSD
2.5" 10,000 RPM SAS HDD
3.5" 15,000 RPM SAS HDD
3.5" 7,200 RPM NL-SAS and SATA HDD

Maximale Anzahl an Laufwerken

Pro System: 16
Über Erweiterungsgehäuse: 112
Via scale-out*: 1,344

* Optional

Passende Erweiterungsgehäuse

Please refer to datasheet

Formfaktor

3U, 19-inch rackmount

RAID-Funktionalität

Hot-Spare: global, designiert oder als Pool
Unterstützte RAID-Level: RAID 0, 1, 3, 5, 6, 10, 30, 50, 60
Online-Erweiterung durch:
- Hinzufügung neuer Laufwerke
- Kopieren und Ersetzen von Laufwerken durch Laufwerke mit einer größeren Kapazität
RAID-Migration
Konfigurierbare Stripe-Größe und Schreibmethode je System
Intelligentes Laufwerk-Handling
- In eingeschränktem Modus: Überspringt irreparable Blöcke, um einen Neuaufbau fortzusetzen
- Im Normalbetrieb: Datenblock-Verifizierung und Wiederherstellung

Datenschutz und Datenservice

Enterprise Scalable Virtualized Architecture
- Linear scaling of performance and capacity (Scale-out)*
- Storage pooling
- Thin-provisioning
- Automatic data migration
- Prioritized volume accessibility
- Distributed load balancing
- Automated storage tiering*
- Data Protection*
- Local replication
- Snapshot
- Volume copy/ volume mirror
- Quick recovery
- Remote replication
- Synchronous and asynchronous
- Data compression
- Near continuous data protection (N-CDP)

*Optional

Umweltfreundliches Design

80 PLUS-zertifizierte Netzgeräte liefern mehr als 80% Energieeffizienz
Intelligente mehrstufige Laufwerkabschaltung

Verfügbarkeit und Zuverlässigkeit

Redundant, hot-swappable hardware modules
CacheSafe technology
Multi-pathing support (EonPath)
Online, non-disruptive firmware upgrades
Device mapper support

Benachrichtigung

Verschiedene Ereignisanzeigemethoden, einschließlich E-Mail und SNMP Trap.

Management

Internet-basierte SANWatch-Management-Software
RS232 serielle Schnittstelle für einen lokalen Zugriff auf eingebettete Firmware-Einrichtungen
Automatisierter Betrieb im Cash Flush und Zwischenspeicherungs-Modus je Pool-Status
Telnet- und SSH-Systemüberwachung über Ethernet
Plattform-unabhängiges Firmware-Management GUI
Modulstatus LED-Indikatoren: Komponenten-Präsenzmeldung & Wärmesensoren über I2C-Bus

OS-Unterstützung

Windows Server 2003
Windows Server 2008, 2008 R2 (einschließlich Hyper-V)
Windows Server 2012 (einschließlich Hyper-V)
Windows 7 Enterprise SP1
Red Hat Enterprise Linux
SUSE Linux Enterprise
Sun Solaris
IBM AIX
HP-UX
Debian
CentOS
VMware
Citrix XenServer

Für die neuesten Informationen über OS-Unterstützung nehmen Sie bitte Kontakt mit unseren Vertriebsmitarbeitern auf.

Service and Support

All ESVA systems are shipped with 3-year Standard Service
Standard Service:
- Hardware warranty; replacement part dispatch on the next business day
- Software update; 24x7 phone, web and email support
Advanced Service*: Standard service + Onsite diagnostics on the next business day
Premium Service*: Standard service + Onsite diagnostics in 4 hours

*Optional
**Service may vary by region

Energieversorgung

Stromversorgung: redundant and hot-swappable 530W x 2 (80 PLUS Bronze)
AC Spannung: 100VAC @10A bis 240VAC @5A mit PFC (Selbstumschaltung)
Frequenz: 47-63 Hz

Environmental

Temperature:
- Operating: 0°C to 40°C
- Non-operating: -40°C to 60°C
Altitude:
- Operating: Sea level to 3,048 m (10,000 ft)
- Non-operating: Sea level to 12,192 m (40,000 ft)
Relative humidity: 5% to 95% non-condensing, operating or non-operating

Abmessungen

445mm (B) x 130mm (H) x 514mm (T)
(Ohne Montagewinkel / Überstände)

Gewicht (ohne HDDS)

19.66kg/ 43.69lbs

Paketabmessungen

776mm (B) x 533mm (H) x 573mm (T)

The “Purchase Reference” feature enables customers to request a quote from Infortrend sales representatives. Please note that actual product orders and purchases are not processed via Infortrend's website. If you wish to order and purchase Infortrend products, please contact our sales representatives directly.

Please note the following:

The list below is based on standard worldwide shipment, models may vary by region. Infortrend sales representatives can provide more information about shipment variations in your region.
“Default Included” means that a component is standard included in system orders. Customers may order additional units to serve as spare components.

ESVA F70-2830 (Legacy product)

Sorry, Couldn't find ordering Information of this model.