Prerequisites
RS-232 serial cable
Terminal emulation software (e.g., PuTTY)
Serial port interface on your client PC (or a USB-to-Serial adapter)
Procedure
Power on the storage system: Turn on the GS storage system and wait until the boot process is complete and the system is ready.
Connect the serial cable: Connect the RS-232 serial cable from the primary controller’s console port to your PC.
Launch the terminal emulator: Open PuTTY on your PC.
Configure connection settings:
Go to the Session category.
Under Connection type, select Serial.
In the Serial line field, enter your PC's corresponding COM port (e.g.,
COM1).In the Speed field, enter the default baud rate for your model:
| Default Baud Rate | Supported Models |
| 115200 | • GS 3000/4000 Gen2/Gen3 • GSe 3000/4000 Gen2/Gen3 • GS 3025UR/4025UR/5024UR
• GS 5000 |
| 38400 | • GS 2024UR/3024UR • GS/GSe Gen1 • GSe Pro |
Establish connection: Click Open to launch the terminal session.
Navigate the firmware console:
Press Ctrl + L to refresh the console screen.
Use Enter to proceed to the next screen and Esc to return to the previous screen.
When prompted, enter the default password:
admin